Researchers offer new technology for liquid-crystal displays
14 May 2018
1
An international research team from Russia, France, and Germany has proposed a new method for orienting liquid crystals in a paper was published in the journal ACS Macro Letters. It could be used to increase the viewing angle of liquid-crystal displays. The
Subpixel structure in a twisted nematic LCD / MIPT Press Office"This is first and foremost a fundamental study exploring the mechanisms of liquid crystal orientation," says Dimitri Ivanov, the head of the Laboratory of Functional Organic and Hybrid Materials at MIPT. "That said, we expect that these mechanisms might have applications in new LCD technology."
Liquid crystals
Most solids are crystals. In a crystal, molecules or atoms form an ordered three-dimensional structure. Unlike solids, liquids lack this internal long-range order, but they can flow. Matter in a liquid-crystal state has properties that are intermediate between those of liquids and crystals: it possesses both the molecular order and the ability to flow. A liquid crystal can thus be viewed as an "ordered" liquid.
Not all materials can exhibit a liquid crystalline state, and the phase transition mechanisms may vary. Among other things, the molecules of an LC material have to be anisometric — that is, rod- or disk-shaped. Some compounds become LCs in a certain temperature range. These are called thermotropic. By contrast, lyotropic LCs adopt the liquid crystalline state when a solvent is added.
The properties of an LC material vary depending on the direction. For example, polarised light propagates in a liquid crystal at different speeds along different directions. Also, in an electric or magnetic field, the orientation of LCs can rapidly change. This phenomenon is known as the Fréedericksz transition. Thanks to the optical properties of LCs and their ability to be easily realigned, they are widely used in the electronic displays of TVs, computers, phones, and other devices.
Liquid-crystal displays
In an LCD, the image is generated by changing the intensity of light in each pixel via an electric field, which realigns liquid crystals. There are several LCD configurations, but the one most commonly used is based on twisted nematic LCs. These are rod-shaped thermotropic liquid crystals that can adopt a twisted configuration by using special aligning substrates. Applying an electric field to these LCs can untwist them. This reproducible and predictable response can be used to control light intensity.
Each pixel in a colour LCD consists of three subpixels — red, green, and blue. By varying their intensities, any colour can be displayed. A sub-pixel in a twisted nematic-based LCD (see image ) consists of a light source, a colour filter, two polarisers, and an LC cell between two glass plates with electrodes.
If the liquid crystals were not there, no light would pass through the cell, because whatever light is let through by the vertical polariser would be blocked by the horizontal polariser before reaching the colour filter. However, special substrates with groovy surfaces can be used to twist LCs in a spiral between two polarisers so as to turn the light precisely by the amount needed to pass through the second polariser. The fully illuminated state of the subpixel is actually its "off" state.
When voltage is applied, the liquid crystals untwist, changing the light polarization to a lesser degree. As a result, some of the light is blocked. Eventually, as some voltage no light can reach the colour filter, and the sub-pixel goes dark.
One of the limitations of this technology is the viewing angle of a display — from a sideways perspective, the LCD will not render the colours accurately. This is due to the co-alignment of liquid crystals.
The issue can be solved using multi-domain displays, in which pixels belong to a number of domains, whose LC orientations are different. This means that at least some of the domains are always oriented in the right way. The international team of researchers led by Professor Dimitri Ivanov, who heads MIPT's Laboratory of Functional Organic and Hybrid Materials, has proposed a brand new solution for multi-domain display design.
Going orthogonal
The authors of the paper reported in this story worked with liquid-crystal polymers. These are substances composed of long molecules with chainlike repetitive structure. It turned out that a slight variation in the structure of polymers can drastically alter their orientation on the substrate.
The polymers used in the study are poly di-n-alkylsiloxanes, or PDAS. Each molecule is a chain containing alternating silicon and oxygen atoms. The silicon atoms in PDAS bear two symmetric hydrocarbon side chains. The n in the name of the compound stands for the length of the side chains, which was varied between 2 and 6.
In the experiment, polymers from the PDAS family were deposited on a Teflon-rubbed aligning surface with a regular pattern of grooves. Generally, crystalline polymers are known to align on such substrates, but only when the lattice parameters of the substrate match those of the deposited polymer. The researchers examined the orientation of the liquid-crystal polymer chains relative to the direction of the grooves on the aligning surface. The side chain length n was increased in steps of just one methylene group (CH?) at a time.
It was found that, contrary to expectations, the liquid-crystal orientation varied depending on side-chain length. At n equal to 2, the needlelike polymer superstructures known as lamellae co-aligned with the Teflon grooves.
Because lamellae are known to be perpendicular to the polymer chains, the researchers concluded that the polymer chains are perpendicular to the grooves on the substrate. When n was increased to 3, the orientation of the lamellae changed by 90 degrees, making them perpendicular to the grooves.
As a result, the LC polymer chains were now oriented parallel to the grooves. At n equal to 4, no further change in orientation was observed. However, when the side-chain length was further increased to 5 and 6, the lamellae again co-aligned with the Teflon grooves.
The researchers have thus found that by merely adding one methylene group to the side chain of the polymer, they could switch the LC orientation, which is crucial for most applications of liquid crystals, including LCDs.
According to the authors, the effect they discovered could be used to design LCDs with improved viewing angles. This could be achieved using a multidomain technology that works by orienting subpixels of one colour in different directions.
As a result, the pixels compensate one another when the display is viewed at an angle, improving colour rendition. The researchers expect this technology to be considerably simpler and cheaper than other multidomain approaches that are currently used.
